dmesg - SAMSUNG MZMTD256 - Intel Core i7-4500U
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.11.0-12-generic (buildd@allspice) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu7) ) #19-Ubuntu SMP Wed Oct 9 16:20:46 UTC 2013 (Ubuntu 3.11.0-12.19-generic 3.11.3)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] reserved
BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable
BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007a8fffff] usable
BIOS-e820: [mem 0x000000007a900000-0x000000007bcfffff] reserved
BIOS-e820: [mem 0x000000007bd00000-0x000000009c6befff] usable
BIOS-e820: [mem 0x000000009c6bf000-0x000000009cebefff] reserved
BIOS-e820: [mem 0x000000009cebf000-0x000000009cfbefff] ACPI NVS
BIOS-e820: [mem 0x000000009cfbf000-0x000000009cffefff] ACPI data
BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
BIOS-e820: [mem 0x000000009d000000-0x000000009f9fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000025f5fffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by INSYDE Corp.
efi: ACPI=0x9cffe000 ACPI 2.0=0x9cffe014 SMBIOS=0x9cebef98
efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
efi: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x000000000006f000) (0MB)
efi: mem02: type=0, attr=0xf, range=[0x000000000006f000-0x0000000000070000) (0MB)
efi: mem03: type=7, attr=0xf, range=[0x0000000000070000-0x0000000000088000) (0MB)
efi: mem04: type=6, attr=0x800000000000000f, range=[0x0000000000088000-0x000000000009f000) (0MB)
efi: mem05: type=0, attr=0xf, range=[0x000000000009f000-0x00000000000a0000) (0MB)
efi: mem06: type=2, attr=0xf, range=[0x0000000000100000-0x00000000014f3000) (19MB)
efi: mem07: type=7, attr=0xf, range=[0x00000000014f3000-0x0000000002000000) (11MB)
efi: mem08: type=2, attr=0xf, range=[0x0000000002000000-0x00000000033f3000) (19MB)
efi: mem09: type=7, attr=0xf, range=[0x00000000033f3000-0x0000000034f86000) (795MB)
efi: mem10: type=2, attr=0xf, range=[0x0000000034f86000-0x00000000367bb000) (24MB)
efi: mem11: type=7, attr=0xf, range=[0x00000000367bb000-0x000000005381a000) (464MB)
efi: mem12: type=2, attr=0xf, range=[0x000000005381a000-0x0000000078d10000) (596MB)
efi: mem13: type=4, attr=0xf, range=[0x0000000078d10000-0x0000000078d30000) (0MB)
efi: mem14: type=7, attr=0xf, range=[0x0000000078d30000-0x00000000798be000) (11MB)
efi: mem15: type=2, attr=0xf, range=[0x00000000798be000-0x0000000079a78000) (1MB)
efi: mem16: type=4, attr=0xf, range=[0x0000000079a78000-0x000000007a900000) (14MB)
efi: mem17: type=0, attr=0xf, range=[0x000000007a900000-0x000000007bd00000) (20MB)
efi: mem18: type=7, attr=0xf, range=[0x000000007bd00000-0x000000007bd0d000) (0MB)
efi: mem19: type=2, attr=0xf, range=[0x000000007bd0d000-0x000000007bd0f000) (0MB)
efi: mem20: type=7, attr=0xf, range=[0x000000007bd0f000-0x000000007bddb000) (0MB)
efi: mem21: type=1, attr=0xf, range=[0x000000007bddb000-0x000000007bf0f000) (1MB)
efi: mem22: type=7, attr=0xf, range=[0x000000007bf0f000-0x000000007f8ef000) (57MB)
efi: mem23: type=4, attr=0xf, range=[0x000000007f8ef000-0x0000000080576000) (12MB)
efi: mem24: type=7, attr=0xf, range=[0x0000000080576000-0x00000000815f2000) (16MB)
efi: mem25: type=4, attr=0xf, range=[0x00000000815f2000-0x0000000081af0000) (4MB)
efi: mem26: type=7, attr=0xf, range=[0x0000000081af0000-0x0000000081cab000) (1MB)
efi: mem27: type=4, attr=0xf, range=[0x0000000081cab000-0x0000000081fe3000) (3MB)
efi: mem28: type=7, attr=0xf, range=[0x0000000081fe3000-0x0000000081fe5000) (0MB)
efi: mem29: type=4, attr=0xf, range=[0x0000000081fe5000-0x0000000082010000) (0MB)
efi: mem30: type=7, attr=0xf, range=[0x0000000082010000-0x0000000082011000) (0MB)
efi: mem31: type=4, attr=0xf, range=[0x0000000082011000-0x000000008215f000) (1MB)
efi: mem32: type=7, attr=0xf, range=[0x000000008215f000-0x0000000082165000) (0MB)
efi: mem33: type=4, attr=0xf, range=[0x0000000082165000-0x0000000082168000) (0MB)
efi: mem34: type=7, attr=0xf, range=[0x0000000082168000-0x000000008216a000) (0MB)
efi: mem35: type=4, attr=0xf, range=[0x000000008216a000-0x00000000821d0000) (0MB)
efi: mem36: type=7, attr=0xf, range=[0x00000000821d0000-0x00000000821d1000) (0MB)
efi: mem37: type=4, attr=0xf, range=[0x00000000821d1000-0x00000000821d8000) (0MB)
efi: mem38: type=7, attr=0xf, range=[0x00000000821d8000-0x00000000821d9000) (0MB)
efi: mem39: type=4, attr=0xf, range=[0x00000000821d9000-0x000000008408f000) (30MB)
efi: mem40: type=7, attr=0xf, range=[0x000000008408f000-0x000000009c29e000) (386MB)
efi: mem41: type=2, attr=0xf, range=[0x000000009c29e000-0x000000009c2a8000) (0MB)
efi: mem42: type=3, attr=0xf, range=[0x000000009c2a8000-0x000000009c6bf000) (4MB)
efi: mem43: type=5, attr=0x800000000000000f, range=[0x000000009c6bf000-0x000000009c8bf000) (2MB)
efi: mem44: type=6, attr=0x800000000000000f, range=[0x000000009c8bf000-0x000000009cabf000) (2MB)
efi: mem45: type=0, attr=0xf, range=[0x000000009cabf000-0x000000009cebf000) (4MB)
efi: mem46: type=10, attr=0xf, range=[0x000000009cebf000-0x000000009cfbf000) (1MB)
efi: mem47: type=9, attr=0xf, range=[0x000000009cfbf000-0x000000009cfff000) (0MB)
efi: mem48: type=4, attr=0xf, range=[0x000000009cfff000-0x000000009d000000) (0MB)
efi: mem49: type=7, attr=0xf, range=[0x0000000100000000-0x000000025f600000) (5622MB)
efi: mem50: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
efi: mem51: type=0, attr=0x0, range=[0x000000009d000000-0x000000009fa00000) (42MB)
efi: mem52: type=11, attr=0x8000000000000001, range=[0x00000000e0000000-0x00000000f0000000) (256MB)
efi: mem53: type=0, attr=0x0, range=[0x00000000fe101000-0x00000000fe113000) (0MB)
efi: mem54: type=11, attr=0x8000000000000001, range=[0x00000000feb00000-0x00000000feb10000) (0MB)
efi: mem55: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
efi: mem56: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed1c000) (0MB)
efi: mem57: type=11, attr=0x8000000000000000, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
efi: mem58: type=11, attr=0x8000000000000001, range=[0x00000000fed20000-0x00000000fee01000) (0MB)
efi: mem59: type=11, attr=0x8000000000000000, range=[0x00000000ffc00000-0x0000000100000000) (4MB)
SMBIOS 2.7 present.
DMI: LENOVO 20266/Yoga2, BIOS 76CN27WW 09/17/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x25f600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E7FFF write-protect
E8000-EFFFF write-combining
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7F80000000 write-back
1 base 0080000000 mask 7FE0000000 write-back
2 base 009D000000 mask 7FFF000000 uncachable
3 base 009E000000 mask 7FFE000000 uncachable
4 base 00FFC00000 mask 7FFFC00000 write-protect
5 base 0100000000 mask 7F00000000 write-back
6 base 0200000000 mask 7F80000000 write-back
7 base 025F600000 mask 7FFFE00000 uncachable
8 base 025F800000 mask 7FFF800000 uncachable
9 base 0260000000 mask 7FE0000000 uncachable
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff88000007e000] 7e000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x02fd1000, 0x02fd1fff] PGTABLE
BRK [0x02fd2000, 0x02fd2fff] PGTABLE
BRK [0x02fd3000, 0x02fd3fff] PGTABLE
init_memory_mapping: [mem 0x25f400000-0x25f5fffff]
[mem 0x25f400000-0x25f5fffff] page 2M
BRK [0x02fd4000, 0x02fd4fff] PGTABLE
init_memory_mapping: [mem 0x25c000000-0x25f3fffff]
[mem 0x25c000000-0x25f3fffff] page 2M
init_memory_mapping: [mem 0x200000000-0x25bffffff]
[mem 0x200000000-0x23fffffff] page 1G
[mem 0x240000000-0x25bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x7a8fffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x7a7fffff] page 2M
[mem 0x7a800000-0x7a8fffff] page 4k
init_memory_mapping: [mem 0x7bd00000-0x9c6befff]
[mem 0x7bd00000-0x7bdfffff] page 4k
[mem 0x7be00000-0x9c5fffff] page 2M
[mem 0x9c600000-0x9c6befff] page 4k
BRK [0x02fd5000, 0x02fd5fff] PGTABLE
BRK [0x02fd6000, 0x02fd6fff] PGTABLE
init_memory_mapping: [mem 0x9cfff000-0x9cffffff]
[mem 0x9cfff000-0x9cffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 1G
RAMDISK: [mem 0x34f86000-0x367bafff]
ACPI: RSDP 000000009cffe014 00024 (v02 LENOVO)
ACPI: XSDT 000000009cffe210 000C4 (v01 LENOVO CB-01 00000001 01000013)
ACPI: FACP 000000009cfeb000 0010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
ACPI Error: Gpe0Block - 32-bit FADT register is too long (32 bytes, 256 bits) to convert to GAS struct - 255 bits max, truncating (20130517/tbfadt-202)
ACPI: DSDT 000000009cfda000 0D0CA (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: FACS 000000009cfba000 00040
ACPI: SLIC 000000009cffd000 00176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: UEFI 000000009cffc000 00236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 000000009cff0000 0B0FA (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: FPDT 000000009cfee000 00044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: MSDM 000000009cfed000 00055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: ASF! 000000009cfec000 000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: HPET 000000009cfea000 00038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: APIC 000000009cfe9000 0008C (v03 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: MCFG 000000009cfe8000 0003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 000000009cfd7000 02028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: BOOT 000000009cfd5000 00028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: LPIT 000000009cfd4000 00094 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: ASPT 000000009cfd2000 00034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: DBGP 000000009cfd1000 00034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 000000009cfce000 00539 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 000000009cfcd000 00AD8 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 000000009cfc9000 03496 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 000000009cfc7000 007C7 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: BGRT 000000009cfc8000 00038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000025f5fffff]
Initmem setup node 0 [mem 0x00000000-0x25f5fffff]
NODE_DATA [mem 0x25f5f7000-0x25f5fbfff]
[ffffea0000000000-ffffea00097fffff] PMD -> [ffff880256c00000-ffff88025ebfffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x25f5fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0006efff]
node 0: [mem 0x00070000-0x00087fff]
node 0: [mem 0x00100000-0x7a8fffff]
node 0: [mem 0x7bd00000-0x9c6befff]
node 0: [mem 0x9cfff000-0x9cffffff]
node 0: [mem 0x100000000-0x25f5fffff]
On node 0 totalpages: 2074694
DMA zone: 64 pages used for memmap
DMA zone: 22 pages reserved
DMA zone: 3974 pages, LIFO batch:0
DMA32 zone: 9867 pages used for memmap
DMA32 zone: 631488 pages, LIFO batch:31
Normal zone: 22488 pages used for memmap
Normal zone: 1439232 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 56
PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
PM: Registered nosave memory: [mem 0x7a900000-0x7bcfffff]
PM: Registered nosave memory: [mem 0x9c6bf000-0x9cebefff]
PM: Registered nosave memory: [mem 0x9cebf000-0x9cfbefff]
PM: Registered nosave memory: [mem 0x9cfbf000-0x9cffefff]
PM: Registered nosave memory: [mem 0x9d000000-0x9f9fffff]
PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfe100fff]
PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
PM: Registered nosave memory: [mem 0xfe113000-0xfeafffff]
PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88025f200000 s86720 r8192 d23872 u262144
pcpu-alloc: s86720 r8192 d23872 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2042253
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7985500K/8298776K available (7141K kernel code, 1082K rwdata, 3260K rodata, 1364K init, 1420K bss, 313276K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-255.
NR_IRQS:16640 nr_irqs:1016 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration failed
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 2393.934 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.86 BogoMIPS (lpj=9575736)
pid_max: default: 32768 minimum: 301
init_memory_mapping: [mem 0x9c6bf000-0x9c8befff]
[mem 0x9c6bf000-0x9c8befff] page 4k
init_memory_mapping: [mem 0x9c8bf000-0x9cabefff]
[mem 0x9c8bf000-0x9cabefff] page 4k
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 28K (ffffffff81e65000 - ffffffff81e6c000)
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 27796 entries in 109 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-4500U CPU @ 1.80GHz (fam: 06, model: 45, stepping: 01)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3
Brought up 4 CPUs
smpboot: Total of 4 processors activated (19151.47 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x9cebf000-0x9cfbefff] (1048576 bytes)
regulator-dummy: no parameters
RTC time: 23:18:55, date: 11/04/13
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 000000009ce7cc18 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20121220)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20121220)
ACPI: SSDT 000000009ce7c618 005AA (v01 PmRef ApIst 00003000 INTL 20121220)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 005AA (v01 PmRef ApIst 00003000 INTL 20121220)
ACPI: SSDT 000000009ce86c18 00119 (v01 PmRef ApCst 00003000 INTL 20121220)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20121220)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xb0000000-0xb03fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xb0518000-0xb051bfff 64bit]
pci 0000:00:04.0: [8086:0a03] type 00 class 0x118000
pci 0000:00:04.0: reg 0x10: [mem 0xb0510000-0xb0517fff 64bit]
pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xb0500000-0xb050ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xb0520000-0xb052001f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xb051c000-0xb051ffff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xb0524000-0xb05243ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f]
pci 0000:00:1f.2: reg 0x14: [io 0x3094-0x3097]
pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087]
pci 0000:00:1f.2: reg 0x1c: [io 0x3090-0x3093]
pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
pci 0000:00:1f.2: reg 0x24: [mem 0xb0523000-0xb05237ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xb0521000-0xb05210ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x3040-0x305f]
pci 0000:00:1f.6: [8086:9c24] type 00 class 0x118000
pci 0000:00:1f.6: reg 0x10: [mem 0xb0522000-0xb0522fff 64bit]
pci 0000:01:00.0: [8086:08b2] type 00 class 0x028000
pci 0000:01:00.0: reg 0x10: [mem 0xb0400000-0xb0401fff 64bit]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0xb0400000-0xb04fffff]
acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: Enabled 5 GPEs in block 00 to 7F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
ACPI: bus type ATA registered
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
e820: reserve RAM buffer [mem 0x7a900000-0x7bffffff]
e820: reserve RAM buffer [mem 0x9c6bf000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
e820: reserve RAM buffer [mem 0x25f600000-0x25fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: [dma 4]
pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
system 00:03: [io 0x0680-0x069f] has been reserved
system 00:03: [io 0xffff] has been reserved
system 00:03: [io 0xffff] has been reserved
system 00:03: [io 0xffff] has been reserved
system 00:03: [io 0x1800-0x18fe] could not be reserved
system 00:03: [io 0x164e-0x164f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:05: [io 0x1854-0x1857] has been reserved
system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:07: Plug and Play ACPI device, IDs SYN2b2c SYN2b00 SYN0002 PNP0f13 (active)
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:08: [mem 0xff000000-0xffffffff] could not be reserved
system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:08: [mem 0x9fa20000-0x9fa20fff] has been reserved
system 00:08: [mem 0x9fa10000-0x9fa1ffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 10 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0xb0400000-0xb04fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
pci_bus 0000:00: resource 19 [mem 0x9fa00000-0xfeafffff]
pci_bus 0000:01: resource 1 [mem 0xb0400000-0xb04fffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 24788K (ffff880034f86000 - ffff8800367bb000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x982a8000-0x9c2a8000] (64MB) mapped at [ffff8800982a8000-ffff88009c2a7fff]
Simple Boot Flag at 0x44 set to 0x1
Scanning for low memory corruption every 60 seconds
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1383607135.820:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 15789
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: irq 56 for MSI/MSI-X
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xa0000000, mapped to 0xffffc90021500000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4 model 0x45
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [ADP1] (off-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ01] (48 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.0: setting latency timer to 64
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.0: debug port 2
ACPI: Battery Slot [BAT1] (battery present)
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xb0524000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.11.0-12-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: setting latency timer to 64
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 57 for MSI/MSI-X
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.11.0-12-generic xhci_hcd
usb usb2: SerialNumber: 0000:00:14.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 9 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.11.0-12-generic xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: fddf6943d8ac4f5b6eb0919a7a3ee3d9088b1bfa'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
Magic number: 5:44:352
rtc_cmos 00:04: setting system clock to 2013-11-04 23:18:56 UTC (1383607136)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 1364K (ffffffff81d10000 - ffffffff81e65000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1040K (ffff8800026fc000 - ffff880002800000)
Freeing unused kernel memory: 836K (ffff880002b2f000 - ffff880002c00000)
systemd-udevd[125]: starting version 204
video: module verification failed: signature and/or required key missing - tainting kernel
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 58 for MSI/MSI-X
[drm] Initialized drm 1.1.0 20060810
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x2 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
ata1: DUMMY
ata2: SATA max UDMA/133 abar m2048@0xb0523000 port 0xb0523180 irq 58
[drm] Memory usable by graphics device = 2048M
checking generic (a0000000 300000) vs hw (a0000000 10000000)
fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: setting latency timer to 64
i915 0000:00:02.0: irq 59 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
fbcon: inteldrmfb (fb0) is primary device
usb 1-1: new high-speed USB device number 2 using ehci-pci
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
ata2.00: ATA-9: SAMSUNG MZMTD256HAGM-000L1, DXT43L0Q, max UDMA/133
ata2.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA SAMSUNG MZMTD256 DXT4 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9
usb 1-1: New USB device found, idVendor=8087, idProduct=8000
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 8 ports detected
sd 1:0:0:0: [sda] Attached SCSI disk
usb 2-4: new full-speed USB device number 2 using xhci_hcd
usb 2-4: New USB device found, idVendor=8087, idProduct=07dc
usb 2-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-6: new full-speed USB device number 3 using xhci_hcd
usb 2-6: New USB device found, idVendor=2047, idProduct=0855
usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-6: Product: Lenovo Yoga
usb 2-6: Manufacturer: Invensense
usb 2-6: SerialNumber: 4FF3806F05001C00
usb 2-6: ep 0x81 - rounding interval to 128 microframes, ep desc says 160 microframes
usb 2-6: ep 0x1 - rounding interval to 128 microframes, ep desc says 160 microframes
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
tsc: Refined TSC clocksource calibration: 2394.457 MHz
usb 2-7: new full-speed USB device number 4 using xhci_hcd
Console: switching to colour frame buffer device 400x112
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
Switched to clocksource tsc
raid6: sse2x1 9024 MB/s
raid6: sse2x2 11923 MB/s
raid6: sse2x4 13747 MB/s
raid6: avx2x1 18317 MB/s
raid6: avx2x2 21233 MB/s
raid6: avx2x4 24599 MB/s
raid6: using algorithm avx2x4 (24599 MB/s)
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function:
avx : 29751.000 MB/sec
bio: create slab at 1
Btrfs loaded
device fsid a552e275-5b66-4c0e-b1d5-539488d834c8 devid 1 transid 116 /dev/sda9
usb 2-7: unable to read config index 0 descriptor/start: -71
usb 2-7: can't read configurations, error -71
usb 2-7: new full-speed USB device number 5 using xhci_hcd
usb 2-7: unable to read config index 0 descriptor/start: -71
usb 2-7: can't read configurations, error -71
usb 2-7: new full-speed USB device number 6 using xhci_hcd
usb 2-7: unable to read config index 0 descriptor/start: -71
usb 2-7: can't read configurations, error -71
usb 2-7: new full-speed USB device number 7 using xhci_hcd
btrfs: disk space caching is enabled
Btrfs detected SSD devices, enabling SSD mode
btrfs: use ssd allocation scheme
btrfs: use lzo compression
btrfs: disk space caching is enabled
systemd-udevd[397]: starting version 204
device fsid a552e275-5b66-4c0e-b1d5-539488d834c8 devid 1 transid 116 /dev/sda9
lp: driver loaded but no devices found
ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPRL 1 (20130517/utaddress-251)
ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPR_ 2 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPRL 1 (20130517/utaddress-251)
ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPR_ 2 (20130517/utaddress-251)
ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \IO_D 3 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
mei_me 0000:00:16.0: setting latency timer to 64
mei_me 0000:00:16.0: irq 60 for MSI/MSI-X
HDA driver get symbol successfully from i915 module
snd_hda_intel 0000:00:03.0: irq 61 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: irq 62 for MSI/MSI-X
cfg80211: Calling CRDA to update world regulatory domain
hda_codec: invalid CONNECT_LIST verb 5[1]:0
hda_codec: invalid CONNECT_LIST verb 6[1]:0
hda_codec: invalid CONNECT_LIST verb 7[1]:0
input: HDA Intel MID HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input5
input: HDA Intel MID HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input6
input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input7
Intel(R) Wireless WiFi driver for Linux, in-tree:
Copyright(c) 2003-2013 Intel Corporation
iwlwifi 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
iwlwifi 0000:01:00.0: irq 63 for MSI/MSI-X
SKU: Nid=0x1d sku_cfg=0x40189e2d
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x1
SKU: check_sum=0x00000008
SKU: customization=0x0000009e
SKU: external_amp=0x5
SKU: platform_type=0x1
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
inputs:
Mic=0x19
Internal Mic=0x12
realtek: No valid SSID, checking pincfg 0x40189e2d for NID 0x1d
realtek: Enabling init ASM_ID=0x9e2d CODEC_ID=10ec0283
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
iwlwifi 0000:01:00.0: loaded firmware version 22.0.7.0 op_mode iwlmvm
microcode: CPU0 sig=0x40651, pf=0x40, revision=0x14
iwlwifi 0000:01:00.0: Detected Intel(R) Wireless N 7260, REV=0x144
iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
microcode: CPU1 sig=0x40651, pf=0x40, revision=0x14
microcode: CPU2 sig=0x40651, pf=0x40, revision=0x14
microcode: CPU3 sig=0x40651, pf=0x40, revision=0x14
microcode: Microcode Update Driver: v2.00 , Peter Oruba
device fsid a552e275-5b66-4c0e-b1d5-539488d834c8 devid 1 transid 116 /dev/sda9
ppdev: user-space parallel port driver
device fsid a552e275-5b66-4c0e-b1d5-539488d834c8 devid 1 transid 116 /dev/sda9
init: avahi-cups-reload main process (618) terminated with status 1
type=1400 audit(1383607144.955:2): apparmor="STATUS" operation="profile_load" parent=638 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=643 comm="apparmor_parser"
type=1400 audit(1383607144.955:3): apparmor="STATUS" operation="profile_load" parent=638 profile="unconfined" name="/usr/sbin/cupsd" pid=643 comm="apparmor_parser"
type=1400 audit(1383607144.955:4): apparmor="STATUS" operation="profile_replace" parent=638 profile="unconfined" name="/usr/sbin/cupsd" pid=643 comm="apparmor_parser"
type=1400 audit(1383607144.967:5): apparmor="STATUS" operation="profile_load" parent=647 profile="unconfined" name="/sbin/dhclient" pid=649 comm="apparmor_parser"
type=1400 audit(1383607144.967:6): apparmor="STATUS" operation="profile_load" parent=647 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=649 comm="apparmor_parser"
type=1400 audit(1383607144.967:7): apparmor="STATUS" operation="profile_load" parent=647 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=649 comm="apparmor_parser"
type=1400 audit(1383607144.967:8): apparmor="STATUS" operation="profile_replace" parent=647 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=649 comm="apparmor_parser"
type=1400 audit(1383607144.967:9): apparmor="STATUS" operation="profile_replace" parent=647 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=649 comm="apparmor_parser"
type=1400 audit(1383607144.967:10): apparmor="STATUS" operation="profile_replace" parent=647 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=649 comm="apparmor_parser"
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
init: failsafe main process (663) killed by TERM signal
type=1400 audit(1383607145.167:11): apparmor="STATUS" operation="profile_load" parent=806 profile="unconfined" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=811 comm="apparmor_parser"
iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x126c00, board id: 2132, fw id: 1180104
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
drm: not enough stolen space for compressed buffer (need 23142400 more bytes), disabling. Hint: you may be able to increase stolen memory size in the BIOS to avoid this.
usb 2-7: unable to read config index 0 descriptor/start: -71
usb 2-7: can't read configurations, error -71
hub 2-0:1.0: unable to enumerate USB device on port 7
usb 2-8: new high-speed USB device number 8 using xhci_hcd
usb 2-8: New USB device found, idVendor=5986, idProduct=0535
usb 2-8: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 2-8: Product: Lenovo EasyCamera
usb 2-8: Manufacturer: Generic
usb 2-8: SerialNumber: 200901010001
usb 2-7: new full-speed USB device number 9 using xhci_hcd
usb 2-7: unable to read config index 0 descriptor/start: -71
usb 2-7: can't read configurations, error -71
usb 2-7: new full-speed USB device number 10 using xhci_hcd
usb 2-7: unable to read config index 0 descriptor/start: -71
usb 2-7: can't read configurations, error -71
usb 2-7: new full-speed USB device number 11 using xhci_hcd
usb 2-7: unable to read config index 0 descriptor/start: -71
usb 2-7: can't read configurations, error -71
wlan0: authenticate with 90:84:0d:d5:c2:ba
wlan0: send auth to 90:84:0d:d5:c2:ba (try 1/3)
wlan0: authenticated
wlan0: associate with 90:84:0d:d5:c2:ba (try 1/3)
wlan0: RX AssocResp from 90:84:0d:d5:c2:ba (capab=0x1511 status=0 aid=5)
iwlwifi 0000:01:00.0: Microcode SW error detected. Restarting 0x2000000.
iwlwifi 0000:01:00.0: CSR values:
iwlwifi 0000:01:00.0: (2nd byte of CSR_INT_COALESCING is CSR_INT_PERIODIC_REG)
iwlwifi 0000:01:00.0: CSR_HW_IF_CONFIG_REG: 0X00489204
iwlwifi 0000:01:00.0: CSR_INT_COALESCING: 0X0000ff40
iwlwifi 0000:01:00.0: CSR_INT: 0X00000000
iwlwifi 0000:01:00.0: CSR_INT_MASK: 0X00000000
iwlwifi 0000:01:00.0: CSR_FH_INT_STATUS: 0X00000000
iwlwifi 0000:01:00.0: CSR_GPIO_IN: 0X00000000
iwlwifi 0000:01:00.0: CSR_RESET: 0X00000000
iwlwifi 0000:01:00.0: CSR_GP_CNTRL: 0X080403c5
iwlwifi 0000:01:00.0: CSR_HW_REV: 0X00000144
iwlwifi 0000:01:00.0: CSR_EEPROM_REG: 0X00000000
iwlwifi 0000:01:00.0: CSR_EEPROM_GP: 0X80000000
iwlwifi 0000:01:00.0: CSR_OTP_GP_REG: 0X803a0000
iwlwifi 0000:01:00.0: CSR_GIO_REG: 0X00080044
iwlwifi 0000:01:00.0: CSR_GP_UCODE_REG: 0X00000000
iwlwifi 0000:01:00.0: CSR_GP_DRIVER_REG: 0X00000000
iwlwifi 0000:01:00.0: CSR_UCODE_DRV_GP1: 0X00000000
iwlwifi 0000:01:00.0: CSR_UCODE_DRV_GP2: 0X00000000
iwlwifi 0000:01:00.0: CSR_LED_REG: 0X00000060
iwlwifi 0000:01:00.0: CSR_DRAM_INT_TBL_REG: 0X88251fbf
iwlwifi 0000:01:00.0: CSR_GIO_CHICKEN_BITS: 0X27800200
iwlwifi 0000:01:00.0: CSR_ANA_PLL_CFG: 0Xd55555d5
iwlwifi 0000:01:00.0: CSR_HW_REV_WA_REG: 0X0001001a
iwlwifi 0000:01:00.0: CSR_DBG_HPET_MEM_REG: 0Xffff0010
iwlwifi 0000:01:00.0: FH register values:
iwlwifi 0000:01:00.0: FH_RSCSR_CHNL0_STTS_WPTR_REG: 0X24f4dd00
iwlwifi 0000:01:00.0: FH_RSCSR_CHNL0_RBDCB_BASE_REG: 0X024f4dc0
iwlwifi 0000:01:00.0: FH_RSCSR_CHNL0_WPTR: 0X00000048
iwlwifi 0000:01:00.0: FH_MEM_RCSR_CHNL0_CONFIG_REG: 0X80801114
iwlwifi 0000:01:00.0: FH_MEM_RSSR_SHARED_CTRL_REG: 0X000000fc
iwlwifi 0000:01:00.0: FH_MEM_RSSR_RX_STATUS_REG: 0X07030000
iwlwifi 0000:01:00.0: FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV: 0X00000000
iwlwifi 0000:01:00.0: FH_TSSR_TX_STATUS_REG: 0X07ff0001
iwlwifi 0000:01:00.0: FH_TSSR_TX_ERROR_REG: 0X00000000
iwlwifi 0000:01:00.0: Start IWL Error Log Dump:
iwlwifi 0000:01:00.0: Status: 0x00000000, count: 6
iwlwifi 0000:01:00.0: 0x000014FE | ADVANCED_SYSASSERT
iwlwifi 0000:01:00.0: 0x00A00220 | uPc
iwlwifi 0000:01:00.0: 0x00000000 | branchlink1
iwlwifi 0000:01:00.0: 0x00000C8A | branchlink2
iwlwifi 0000:01:00.0: 0x00014078 | interruptlink1
iwlwifi 0000:01:00.0: 0x000C2984 | interruptlink2
iwlwifi 0000:01:00.0: 0x00000000 | data1
iwlwifi 0000:01:00.0: 0x00000005 | data2
iwlwifi 0000:01:00.0: 0xDEADBEEF | data3
iwlwifi 0000:01:00.0: 0x00017D73 | beacon time
iwlwifi 0000:01:00.0: 0x2781E888 | tsf low
iwlwifi 0000:01:00.0: 0x0000029A | tsf hi
iwlwifi 0000:01:00.0: 0x00000000 | time gp1
iwlwifi 0000:01:00.0: 0x00715859 | time gp2
iwlwifi 0000:01:00.0: 0x00000000 | time gp3
iwlwifi 0000:01:00.0: 0x00321600 | uCode version
iwlwifi 0000:01:00.0: 0x00000144 | hw version
iwlwifi 0000:01:00.0: 0x00489204 | board version
iwlwifi 0000:01:00.0: 0x092E0008 | hcmd
iwlwifi 0000:01:00.0: 0x24022080 | isr0
iwlwifi 0000:01:00.0: 0x01000000 | isr1
iwlwifi 0000:01:00.0: 0x00000002 | isr2
iwlwifi 0000:01:00.0: 0x0041FCC0 | isr3
iwlwifi 0000:01:00.0: 0x00000000 | isr4
iwlwifi 0000:01:00.0: 0x01000112 | isr_pref
iwlwifi 0000:01:00.0: 0x00027C32 | wait_event
iwlwifi 0000:01:00.0: 0x00000010 | l2p_control
iwlwifi 0000:01:00.0: 0x00018030 | l2p_duration
iwlwifi 0000:01:00.0: 0x0000003F | l2p_mhvalid
iwlwifi 0000:01:00.0: 0x000000CF | l2p_addr_match
iwlwifi 0000:01:00.0: 0x00000005 | lmpm_pmg_sel
iwlwifi 0000:01:00.0: 0x17061625 | timestamp
iwlwifi 0000:01:00.0: 0x00004858 | flow_handler
ieee80211 phy0: Hardware restart was requested
iwlwifi 0000:01:00.0: FW error in SYNC CMD PHY_CONTEXT_CMD
CPU: 0 PID: 148 Comm: kworker/u16:2 Tainted: GF 3.11.0-12-generic #19-Ubuntu
Hardware name: LENOVO 20266/Yoga2, BIOS 76CN27WW 09/17/2013
Workqueue: phy0 ieee80211_iface_work [mac80211]
00000000000001f4 ffff88024e119688 ffffffff816e547a ffff88025082c000
ffff88024e1196f0 ffffffffa04291ef ffff88024e119700 0000000000000000
ffff88024e7d4650 ffffffff81085580 ffff88024e1196b8 ffff88024e1196b8
Call Trace:
[] dump_stack+0x45/0x56
[] iwl_trans_pcie_send_hcmd+0x53f/0x5d0 [iwlwifi]
[] ? wake_up_atomic_t+0x30/0x30
[] iwl_mvm_send_cmd+0x32/0xb0 [iwlmvm]
[] iwl_mvm_send_cmd_pdu+0x41/0x50 [iwlmvm]
[] iwl_mvm_phy_ctxt_apply.constprop.5+0x10e/0x230 [iwlmvm]
[] iwl_mvm_phy_ctxt_changed+0x22/0x30 [iwlmvm]
[] iwl_mvm_change_chanctx+0x60/0xb0 [iwlmvm]
[] ieee80211_recalc_smps_chanctx+0xfa/0x310 [mac80211]
[] ieee80211_recalc_smps+0x40/0x80 [mac80211]
[] ieee80211_assoc_success+0x633/0xae0 [mac80211]
[] ? printk+0x67/0x69
[] ? iwl_trans_pcie_tx+0x3df/0x7e0 [iwlwifi]
[] ? __sdata_info+0x61/0xa0 [mac80211]
[] ieee80211_rx_mgmt_assoc_resp+0x11f/0x240 [mac80211]
[] ieee80211_sta_rx_queued_mgmt+0x2df/0x540 [mac80211]
[] ? ieee80211_xmit+0x9d/0x100 [mac80211]
[] ? __ieee80211_tx_skb_tid_band+0x75/0x80 [mac80211]
[] ? default_spin_lock_flags+0x9/0x10
[] ? update_curr+0xec/0x180
[] ? dequeue_entity+0x143/0x5c0
[] ? mod_timer+0x110/0x220
[] ? default_spin_lock_flags+0x9/0x10
[] ieee80211_iface_work+0x25c/0x360 [mac80211]
[] process_one_work+0x17c/0x430
[] worker_thread+0x11c/0x3c0
[] ? manage_workers.isra.24+0x2a0/0x2a0
[] kthread+0xc0/0xd0
[] ? kthread_create_on_node+0x120/0x120
[] ret_from_fork+0x7c/0xb0
[] ? kthread_create_on_node+0x120/0x120
iwlwifi 0000:01:00.0: PHY ctxt cmd error. ret=-5
wlan0: associated
iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: GB
cfg80211: Regulatory domain changed to country: GB
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
usb 2-7: new full-speed USB device number 12 using xhci_hcd
usb 2-7: New USB device found, idVendor=04f3, idProduct=016f
usb 2-7: New USB device strings: Mfr=4, Product=14, SerialNumber=0
usb 2-7: Product: Touchscreen
usb 2-7: Manufacturer: ELAN
usb 2-7: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
wlan0: Limiting TX power to 30 (30 - 0) dBm as advertised by 90:84:0d:d5:c2:ba
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0535)
input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/input/input11
hid-multitouch 0003:04F3:016F.0002: input,hiddev0,hidraw0: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-7/input0
usbcore: registered new interface driver btusb
input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input12
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
Bluetooth: hci0: read Intel version: 370710018002030d2e
Bluetooth: hci0: Intel device is already patched. patch num: 2e
bio: create slab at 2
Adding 1999868k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:1999868k SSFS
systemd-hostnamed[2569]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
wlan0: deauthenticating from 90:84:0d:d5:c2:ba by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
init: anacron main process (3702) killed by TERM signal
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sda] Synchronizing SCSI cache
sd 1:0:0:0: [sda] Stopping disk
mei_me 0000:00:16.0: suspend
PM: suspend of devices complete after 1116.633 msecs
PM: late suspend of devices complete after 0.161 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: power state changed by ACPI to D3cold
PM: noirq suspend of devices complete after 79.826 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
Broke affinity for irq 23
Broke affinity for irq 58
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
CPU3 is up
ACPI: Waking up from system sleep state S3
xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 144.178 msecs
PM: early resume of devices complete after 0.075 msecs
i915 0000:00:02.0: setting latency timer to 64
xhci_hcd 0000:00:14.0: setting latency timer to 64
snd_hda_intel 0000:00:03.0: irq 60 for MSI/MSI-X
mei_me 0000:00:16.0: irq 61 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: irq 62 for MSI/MSI-X
ahci 0000:00:1f.2: setting latency timer to 64
ehci-pci 0000:00:1d.0: setting latency timer to 64
dpm_run_callback(): pnp_bus_resume+0x0/0x80 returns -19
PM: Device 00:06 failed to resume: error -19
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
ata2.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
ata2.00: configured for UDMA/133
sd 1:0:0:0: [sda] Starting disk
usb 2-4: reset full-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024e672900
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024e672940
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024e672980
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880253155d00
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880253155d40
usb 2-6: reset full-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024d6772c0
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024d677280
usb 2-6: ep 0x81 - rounding interval to 128 microframes, ep desc says 160 microframes
usb 2-6: ep 0x1 - rounding interval to 128 microframes, ep desc says 160 microframes
usb 2-8: reset high-speed USB device number 8 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024f79c400
usb 2-7: reset full-speed USB device number 12 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024e629080
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88024e6290c0
usb 2-7: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
PM: resume of devices complete after 773.694 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
atkbd serio0: Unknown key pressed (translated set 2, code 0xbf on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e03f ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xbf on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e03f ' to make it known.
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
atkbd serio0: Unknown key pressed (translated set 2, code 0xbf on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e03f ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xbf on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e03f ' to make it known.
mce: [Hardware Error]: Machine check events logged
wlan0: authenticate with 00:23:cd:16:b6:42
wlan0: send auth to 00:23:cd:16:b6:42 (try 1/3)
wlan0: authenticated
wlan0: associate with 00:23:cd:16:b6:42 (try 1/3)
wlan0: RX AssocResp from 00:23:cd:16:b6:42 (capab=0x11 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: GB
cfg80211: Regulatory domain changed to country: GB
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
show_signal_msg: 162 callbacks suppressed
wpa_supplicant[829]: segfault at 2000099 ip 00000000004b1795 sp 00007fffb65eecc0 error 4 in wpa_supplicant[400000+15f000]
iwlwifi 0000:01:00.0: No assocation and the time event is over already...
wlan0: Connection to AP 00:23:cd:16:b6:42 lost
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan0: authenticate with 00:23:cd:16:b6:42
wlan0: send auth to 00:23:cd:16:b6:42 (try 1/3)
wlan0: authenticated
wlan0: associate with 00:23:cd:16:b6:42 (try 1/3)
wlan0: RX AssocResp from 00:23:cd:16:b6:42 (capab=0x11 status=0 aid=3)
wlan0: associated
cfg80211: Calling CRDA for country: GB
cfg80211: Regulatory domain changed to country: GB
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
perf samples too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 50000